Products 1-15 of 15
Show
Ab-10 Rapid Fluorescein Labeling Kit
Item #: LK32 -

Product Description Ab-10 Rapid Fluorescein Labeling Kit is for labeling fluorescein to 10 µg antibody in less than 30 minutes. Labeling agent included in the kit has succinimidyl ester group , which can easily make a covalent bond with an amino group of the target antibody without any activation process. The kit contains all the necessary reagents for antibody labeling. Fig. 1 IgG Labeling Reaction of NH2-reactive Fluorescein Fig. 2 Labeing Procedure Fig. 3 Fluorescence Spectrum of...

Ab-10 Rapid HiLyte Fluor 555 Labeling Kit
Item #: LK35 -

Product Description Ab-10 Rapid HiLyte Fluor* 555 Labeling Kit enables rapid (in less than 30 min) and easy labeling of HiLyte Fluor 555 to 10 μg antibody. Reactive HiLyte Fluor 555 (a component of the kit) has succinimidyl ester group, that can easily make a covalent bond with an amino group of the target antibody without any activation process. This kit contains all the necessary reagents to prepare a fluorescein-labeled antibody. *HiLyte Fluor is a trademark of AnaSpec, Inc. Fig. 1 Labeing...

Ab-10 Rapid HiLyte Fluor 647 Labeling Kit
Item #: LK36 -

Product Description Ab-10 Rapid HiLyte Fluor* 647 Labeling Kit enables rapid (in less than 30 min) and easy labeling of HiLyte Fluor 647 to 10 μg antibody. Reactive HiLyte Fluor 647 (a component of the kit) has succinimidyl ester group, that can easily make a covalent bond with an amino group of the target antibody without any activation process. This kit contains all the necessary reagents to prepare a fluorescein-labeled antibody. *HiLyte Fluor is a trademark of AnaSpec, Inc. Fig. 1 Labeing...

Ab-10 Rapid R-Phycoerythrin Labeling Kit
Item #: LK34 -

Product Description Ab-10 Rapid R-Phycoerythrin Labeling Kit is for labeling R-Phycoerythrin to 10 µg antibody in less than 30 minutes. Labeling agent included in the kit has succinimidyl ester group , which can easily make a covalent bond with an amino group of the target antibody without any activation process. The kit contains all the necessary reagents for antibody labeling. Fig. 1 IgG Labeling Reaction of NH2-reactive R-Phycoerythrin Fig. 2 Labeing Procedure Fig. 3 Fluorescence Spectrum...

Allophycocyanin Labeling Kit-NH2
Item #: LK21 -

Product Description Phycobiliproteins are fluorescent proteins derived from cyanobacteria and eukaryotic algae. Their fluorescence is much higher than chemical fluorescent probes such as fluorescein and rhodamine. Allophycocyanin (APC) is one of the phycobiliproteins, and it has a red fluorescence at around 660 nm (Fig. 1). Because of this high fluorescence, phycobiliprotein-labeled antibodies and other molecules can provide greater sensitivity in flow cytometry and immunostaining....

Allophycocyanin Labeling Kit-SH
Item #: LK24 -

Product Description Phycobiliproteins are fluorescent proteins derived from cyanobacteria and eukaryotic algae. Their fluorescence is much higher than that of chemical fluorescent probes such as fluorescein and rhodamine. Allophycocyanin (APC) is one of the phycobiliproteins, and it has a red fluorescence at around 660 nm (Fig. 1). Because of this high fluorescence, phycobiliprotein-labeled antibodies and other molecules can provide greater sensitivity in flow cytometry and immunostaining....

Fluorescein Labeling Kit-NH2
Item #: LK01 -

Product Description Fluorescein Labeling Kit-NH2 is mainly used for the preparation of fluorescein-labeled proteins such as IgG for immunostaining and cellular proteins for tracing. Amine-reactive fluorescein, a component of this kit, has succinimidyl groups (NHS) that react with the amino groups on proteins or other molecules (Fig. 1). This kit contains all the reagents necessary for labeling, including storage buffer. Each vial of fluorescein can label up to 200 μg of IgG, conjugating about...

HiLyte Fluor 555 Labeling Kit-NH2
Item #: LK14 -

Product Description HiLyte Fluor* 555 Labeling Kit-NH2 is used mainly for the preparation of red fluorescence-labeled proteins, such as IgG, for immunostaining, and cellular proteins for tracing. NH2-reactive HiLyteFluor 555, a component of this kit, has a succinimidyl group (NHS) that reacts with amino groups on proteins or other molecules (Fig. 1). This kit contains all the reagents necessary for labeling. Each tube of HiLyte Fluor 555 can label up to 200 μg of IgG, conjugating about 4 to 6...

HiLyte Fluor 647 Labeling Kit-NH2
Item #: LK15 -

Product Description HiLyte Fluor* 647 Labeling Kit-NH2 is mainly used for the preparation of red fluorescence-labeled proteins, such as IgG, for immunostaining, and cellular proteins for tracing. NH2-reactive HiLyteFluor 647, a component of this kit, has a succinimidyl group (NHS) that reacts with amino groups on proteins or other molecules (Fig. 1). This kit contains all the reagents necessary for labeling. Each tube of HiLyte Fluor 647 can label up to 200 μg of IgG, conjugating about 4 to 6...

IC3-OSu special packaging IC3-OSu special packaging, N-Ethyl-N’-[5-(N’-succinimidyloxycarbonyl)pentyl]indocarobcyanine chloride
Item #: I271 -

Product Description IC3 and IC5 are indocyanine dyes that can react with aminegroups on proteins, peptides, and amine-modified oligonucleotides. Because neither IC3 nor IC5 has a sulfonate group in its structure, water solubility of the molecules is very low. An organic solvent is required to dissolve the compound. Over-labeling of proteins with these compounds may precipitate the labeled protein from aqueous solutions as a result of the poor water solubility. However, because no negative...

IC5-OSu special packaging IC5-OSu special packaging, N-Ethyl-N’-[5-(N’-succinimidyloxycarbonyl)pentyl]-3,3,3”,3”-tetramethyl-2,2’-indocarobcyanine chloride
Item #: I272 -

Product Description IC3 and IC5 are indocyanine dyes which can react with aminegroups on proteins, peptides, and amine-modified oligonucleotides. Since both IC3 and IC5 do not have a sulfonate group in the structure, water-solubility of the molecules is very low. An organic solvent is required to dissolve the compound. Over labeling of proteins with these compounds may precipitate the labeled protein from aqueous solutions due to the poor water-solubility. However, since no negative charge is...

ICG Labeling Kit - NH2 ICG Labeling Kit - NH2
Item #: LK31 -

Product Description ICG Labeling Kit - NH2 is used primarily for the preparation of ICG (Iindocyanin green)-labeled antibody for near-infrared fluorescence imaging. ICG offers two remarkable properties: 1) ICG has a strong near-infrared fluorescence even after a few days under physiological conditions. The excitation and emission wavelength of the ICG-labeled proteins are 774 nm and 805 nm, respectively. 2) ICG has been used in clinical fields such as a hepatic deficiency testing. Therefore,...

ICG-Sulfo-OSu ICG-Sulfo-OSu, 2-[7-[1,3-Dihydro-1,1-dimethyl-3-(4-sulfobutyl)-2H-benzo[e]indol-2-ylidene]-1,3,5-heptatrienyl]- 1,1-dimethyl-3-[5-(3-sulfosuccinimidyl)oxycarbonylpentyl]-1H-benzo[e]indolium, inner salt, sodium salt
Item #: I254 -

Product Description ICG is one of the dyes that is used for determining cardiac output, hepatic function, and liver blood flow, as well as for ophthalmic angiography. It has a long excitation wavelength and emission wavelength of about 780 nm and 800 nm, respectively. Because of its long wavelength near the infrared region and low cytotoxicity, ICG is used to label antibodies for in vivo assay. However, fluorescent intensity after conjugation with protein is quite low because of the formation...

R-Phycoerythrin Labeling Kit-NH2
Item #: LK23 -

Product Description Phycobiliproteins are fluorescent proteins derived from cyanobacteria and eukaryotic algae. Their fluorescence is much higher than chemical fluorescent probes such as fluorescein and rhodamine. R-Phycoerythrin (R-PE) is one of the phycobiliproteins and has a red fluorescence at around 578 nm, and it can be excited at 488nm (Fig. 1). Because of this high fluorescence, phycobiliprotein labeled antibodies, and other molecules can provide greater sensitivity in flow cytometry...

R-Phycoerythrin Labeling Kit-SH
Item #: LK26 -

Product Description Phycobiliproteins are fluorescent proteins derived from cyanobacteria and eukaryotic algae. Their fluorescence is much higher than chemical fluorescent probes such as fluorescein and rhodamine. R-phycoerythrin (R-PE) is one of the phycobiliproteins and has an orange fluorescence at around 578 nm, and it can be excited at 488 nm (Fig. 1). Because of this high fluorescence, phycobiliprotein-labeled antibodies or other molecules can give greater sensitivity in flow cytometry...